Checked on: 2026-08-19 | Broker terms, regulation, and pricing can change. Always verify at the official HFM site before opening an account.

Affiliate Disclosure: HNL Growth may earn a commission if you open an account through our links, at no additional cost to you. Risk Warning: CFDs and leveraged forex products are complex instruments and carry a high risk of losing money rapidly due to leverage. Between 65-95% of retail investor accounts lose money when trading CFDs, depending on the HFM entity and account type. Trading forex and CFDs may not be suitable for all investors. Consider your objectives, experience, and risk appetite before trading, and ensure you understand the risks involved. Broker Disclosure: HFM (HF Markets Group) is a live, regulated multi-entity broker (not a simulated prop-firm evaluation) — trades are executed with real capital in live market conditions, subject to normal market risk. Protections vary significantly by the specific legal entity that onboards your account.

HFM Spreads and Commission 2026: Real All-In Costs

HFM prices trading through five account tiers — InfinityX, Pro, Zero, Premium, and Cent — each with a different cost mechanic. Spreads are variable across all tiers: InfinityX starts from 0.3 pips, Pro from 0.6 pips, Zero from 0.0 pips on forex with a separate per-lot commission, Premium from 1.4 pips spread-only, and Cent from 1.4 pips on fractional sizing. Commission is charged on the Zero account and on specific symbols under InfinityX; the other tiers bundle the broker's remuneration into the spread.

The published "from" figures represent best-case quotes during peak London/New York overlap liquidity. Actual average spreads across a full trading day are materially higher. For cost-sensitive strategies, the gap between the "from" floor and real execution cost is the most important number to verify — and it requires measuring on a live or demo account during your actual trading hours, not reading a comparison table.

Critical gap before you can compare costs on Zero or InfinityX: HFM does not publish the per-lot commission rate on its public account comparison page. Without this figure, round-turn cost calculations for those tiers are incomplete. Section 5 below explains exactly where to find it.

Non-trading fees (inactivity, withdrawals, currency conversion) apply and vary by entity. HFM permits scalping, hedging, and EA use; the key decision for an active trader is matching account tier to strategy and confirming the commission rate before scaling any position-sizing math.

HFM Trading Costs at a Glance

Account	Pricing model	Spread from	Commission	Min deposit	Best for
InfinityX	Raw + commission (select symbols)	0.3 pips	Rate not on public page — find in platform spec (see §5)	$500	High-volume traders wanting tightest quotes
Pro	Spread-only	0.6 pips	None on forex	$100 / €100	Day traders on majors
Zero	Raw spread + commission	0.0 pips (forex)	Rate not on public page — find in platform spec (see §5)	$0 / €0	Scalpers and EA users
Premium	Spread-only	1.4 pips	None	$0 / €0	Swing traders, lower frequency
Cent	Spread-only, fractional	1.4 pips	None	$0	Position sizing practice

Source: HFM trading accounts comparison page. All spreads are variable "from" figures representing best-case quotes during peak liquidity. Actual execution across a typical trading day will be wider — often materially so outside the London/New York overlap.

Disclosure: This page may contain affiliate links. We may earn a commission if you open an account through our links, at no extra cost to you.

Open an HFM account and check live spreads

How Each HFM Account Type Charges You

HFM's account taxonomy is built around two pricing models: spread-only (Premium, Pro, Cent) and raw spread + commission (Zero, InfinityX on select symbols). Understanding which model fits your strategy matters more than the marketing name.

InfinityX — Raw quotes, commission-bearing, high minimum

InfinityX is HFM's tightest-spread tier, quoting from 0.3 pips on majors with commission applied per the published schedule. It requires a $500 minimum deposit and supports forex, metals, indices, cryptocurrencies, and energies. Margin call is set at 20% with a 0% stop-out — a more aggressive liquidation threshold than the other tiers.

Maximum leverage is listed as "unlimited" in HFM's account comparison table, with a footnote that leverage may be adjusted; consult the T&Cs. More importantly, "unlimited" applies only under offshore entities such as HF Markets (SV) Ltd. Clients onboarded under FCA or CySEC are subject to ESMA-derived leverage caps (typically 1:30 on major forex pairs for retail clients). The entity under which your account is actually held determines the leverage ceiling that applies, not the marketing headline.

The commission rate is the critical variable for InfinityX. Because HFM does not publish it on the public account comparison page, a complete round-turn cost calculation requires retrieving it from the platform first. See §5 for the exact steps.

Pro — Spread-only, tighter than Premium

Pro quotes from 0.6 pips with no separate commission on forex pairs. The $100 / €100 minimum deposit is higher than Premium but still accessible. For a day trader executing10–30 round turns per week on EUR/USD or USD/JPY, the bundled-spread model removes the need to track per-trade commission separately.

The0.6-pip figure is the best-case floor during peak liquidity. Spreads on the Pro account outside the London/New York overlap, around the daily rollover window, or before major economic releases are higher. Use the "from" value as a minimum bound only when projecting costs.

Zero — Raw spread, explicit commission

Zero quotes from 0.0 pips on forex with a per-lot commission charged on each trade. This is the model most comparable to IC Markets Raw Spread or Pepperstone Razor: you see the interbank spread and pay a fixed fee per round lot. "From0" is a best-case quote, not a guarantee — during rollover and news events, spreads widen like any variable-spread broker.

The commission rate is the critical variable for Zero. Without it, round-turn cost cannot be calculated. See §5.

Premium — Spread-only, no minimum

Premium is the default entry tier. From 1.4 pips on EUR/USD, no commission, no minimum deposit. The wider spread is the cost; it suits swing traders who hold positions for days and execute fewer round turns per month.

Cent — Fractional lots, wider spreads

Cent accounts denominate in USC (US cents) with a contract size of 1 lot = 1,000 units rather than 100,000. Spreads from 1.4 pips. Instruments are limited to forex and gold. Useful for testing strategy logic at real-market spreads with fractional risk.

Strategy-to-Account Recommendation Matrix

Strategy	Recommended account	Rationale	Est. monthly cost (EUR/USD,1 std lot, "from" spread baseline)
Scalping (<5 min holds, 100+ trades/mo)	Zero or InfinityX	Tightest spread floor; commission predictable per trade once confirmed	Cannot be calculated without commission rate. Find rate first (§5); cost = commission × round-turn count.
Intraday day trading (20trades/mo)	Pro	Spread-only simplifies P&L tracking	At "from" 0.6 pips: 20 × $6= $120 minimum. Actual wider spread increases this.
Swing (5–10 trades/mo, multi-day holds)	Premium	Fewer round turns offset wider spread; swap dominates cost	At "from" 1.4 pips: 10 × $14 = $140 minimum. Swap cost on multi-day holds adds to this — use HFM's calculator.
EA / algo	Zero or InfinityX	Commission-based pricing is consistent for automated logic	Cannot be calculated without commission rate. Find rate first (§5).
Copy trading	Premium or Pro	Matches typical signal provider hold times	Varies by signal frequency.

"From" spread baselines only. Actual execution will be wider. Commission rows cannot be completed without the rate published in the platform specification.

Spread Benchmarks Across Key Instruments

All figures are HFM's published "from" values. They represent best-case quotes during peak London/New York overlap liquidity. Treat them as a floor, not an average.

Instrument	InfinityX	Pro	Zero	Premium	Cent
EUR/USD	from 0.3 pips	from 0.6 pips	from 0.0 pips + comm.	from 1.4 pips	from 1.4 pips
GBP/USD	from 0.3 pips (indicative)	from 0.6 pips (indicative)	from 0.0 pips + comm.	from 1.4 pips (indicative)	—
USD/JPY	from 0.3 pips (indicative)	from 0.6 pips (indicative)	from 0.0 pips + comm.	from 1.4 pips (indicative)	—
XAUUSD	No published "from" value — measure on platform	No published "from" value — measure on platform	No published "from" value — measure on platform	No published "from" value — measure on platform	Gold available
US30	Available	Available	Available	Available	—
BTC/USD	Available	Available	Available	Available	—

Source: HFM trading accounts comparison page. "Indicative" denotes instruments where HFM publishes the tier's headline "from" figure for forex generally rather than a pair-specific value. XAUUSD does not appear with a headline "from" pip value on the account comparison page; measure it directly as described below. Cent trades forex and gold only.

Gold (XAUUSD) — What to verify yourself

HFM does not publish a headline "from" value for XAUUSD spread across tiers on the account comparison page. Gold spreads are quoted in dollars per ounce: a $0.30 spread equals roughly $30 per standard lot (100oz). Before committing capital, open the Market Watch on MT4/MT5 for your chosen account tier and record the bid-ask spread across three sessions (Asian, London open, New York open) over two trading days. This is the only way to establish a working cost baseline for your lot sizing.

When Spreads Widen

Variable spreads widen under three conditions every trader should plan for:

• Rollover window (typically 21:00–22:00 server time): liquidity providers roll positions; forex spreads can widen 3–10× the daytime average. Holding a scalping position through rollover is a common way to give back a day's edge.
• Scheduled high-impact releases (NFP, CPI, central bank decisions): spreads widen in the seconds before and can remain elevated for 30–120 seconds after. Market orders during this window face slippage on top of spread cost.
• Thin sessions (late Asian, bank holidays, Christmas/New Year week): fewer liquidity providers quote; minor pairs and crosses become materially more expensive than their headline spread suggests.

This is structural to STP/ECN-style pricing and not unique to HFM. It matters for strategy design: a scalper who trades only the London/New York overlap faces a materially different cost profile than one who trades the Asian session.

Worked Cost Examples: What You Actually Pay Per Trade

The formula for round-turn cost is:

Round-turn cost = (spread in pips × pip value per lot) + commission (if any) + swap (if held overnight)

Pip values for1 standard lot (100,000 units) quoted in USD:

• EUR/USD, GBP/USD, and most USD-quoted pairs: 1pip = $10
• USD/JPY: 1 pip ≈ $10at current rates (varies with exchange rate)
• XAUUSD: 1 standard lot = 100 oz; $0.10 move = $10 per lot

EUR/USD Round-Turn Cost (1 standard lot, intraday, "from" spread floor)

Account	Spread used	Spread cost	Commission	Round-turn total
InfinityX	from 0.3 pips	$3	Not on public page — retrieve from platform spec (§5)	$3 + commission
Pro	from 0.6 pips	$6	$0	$6 minimum
Zero	from 0.0 pips	$0	Not on public page — retrieve from platform spec (§5)	Commission only
Premium	from 1.4 pips	$14	$0	$14 minimum
Cent	from 1.4 pips	$0.14 (1,000-unit lot)	$0	$0.14 per cent lot

All totals are minimums at best-case spread. Actual round-turn cost during typical sessions will be higher.

Scaling to Lot Size and Trade Frequency

For20 round turns per month on EUR/USD at1standard lot, using "from" spreads as a minimum baseline:

• Pro: 20 × $6 = $120/month minimum in spread cost
• Premium: 20 × $14 = $280/month minimum in spread cost
• Zero / InfinityX: 20 × commission = unknown without commission rate — retrieve first (§5), then multiply by 2for round turn if quoted per side

At0.1 lot (10,000 units), divide by 10. At 50trades/month, multiply by 2.5. These are cost floors; plan for actual averages to be higher.

XAUUSD Round-Turn Cost

Because HFM does not publish a headline gold spread, use this template once you have measured the spread on your platform:

Cost per1-lot XAUUSD trade = (spread in $ per oz ×100) + commission (if any)

If the bid-ask reads $2,340.20 / $2,340.50, the spread is $0.30 and the cost is $30 per lot, before commission. Record the spread at three times of day for a working average before sizing positions.

Ready to trade at these costs? Open an HFM account

Commission, Swap, and Non-Trading Fees

Finding the Commission Rate for Zero and InfinityX

HFM's account comparison table confirms that commission applies on Zero and on select InfinityX symbols but does not publish the per-lot rate publicly. This is the most important number for scalpers and EA users evaluating these tiers. To retrieve it:

1. Open a demo account for the relevant tier on MT4 or MT5.
2. In Market Watch, right-click the instrument (e.g., EURUSD) and select Specification.
3. Locate the Commission field. Note whether the figure is per side or per round turn — the difference is2×. Most brokers quote per side; confirm which convention HFM uses for your specific instrument.
4. Multiply by 2 if per side to get the round-turn commission.
5. Add to the spread cost from §4 to get your full all-in cost per lot.

Do this for every instrument you intend to trade, as commission rates can vary by instrument.

Overnight Financing (Swap)

HFM publishes a swaps calculator, updated daily and accessible from the HFM website. The published formula:

Swap fee = contract size × swap rate (points) × number of nights × minimum price increment

Worked example from HFM's own site: 1 lot short EUR/USD, swap short rate = 1.5 points, 2 nights, USD account. Swap fee = 100,000 × 1.5 × 2 × 0.00001 = $3.00 debited.

This example illustrates the formula only; it uses a rate drawn from HFM's calculator page and is not a current or guaranteed rate. Swap rates change daily. Additional structural points:

• Rates are per instrument and can be positive or negative depending on direction and the prevailing interest-rate differential.
• Most brokers, including HFM, apply triple swap on one weekday to account for weekend settlement. Confirm the specific day on your platform's contract specification.
• Swap-free accounts are available for specific instruments under HFM's swap-free terms. Availability depends on the instrument and entity.

Indicative swap reference — verify all current rates via HFM's swaps calculator before trading:

Instrument	Long swap	Short swap	Notes
EUR/USD	Retrieve from calculator	Retrieve from calculator	Formula example: 1.5 pts short = $3/lot/night
GBP/USD	Retrieve from calculator	Retrieve from calculator	Often negative both sides
USD/JPY	Retrieve from calculator	Retrieve from calculator	Long side can be positive given rate differential
XAUUSD	Retrieve from calculator	Retrieve from calculator	Typically negative both sides
US30	Retrieve from calculator	Retrieve from calculator	Financing includes index dividend adjustment

Non-Trading Fees

Non-trading fees are entity-specific and published in each entity's legal documentation rather than on a single public fee page. The key categories to verify before funding — and the specific questions to ask:

Fee category	What to check
Inactivity fee	Dollar amount per period; how many months of inactivity trigger it; whether it applies to your specific entity
Withdrawal fees	Per-method amounts (bank wire, card, e-wallet); number of free withdrawals per month if any
Deposit processing	Whether any deposit methods carry a pass-through fee
Currency conversion	Markup applied when funding in a currency different from account base currency
Internal transfers	Fees for moving funds between HFM trading accounts

These categories are confirmed as relevant by HFM's entity structure; specific amounts are not available on the public comparison page. Request the full fee schedule for your entity in writing from support before funding — a written reply is more reliable than a verbal one and creates a record.

HFM vs Competitors: Total Cost Compared

The meaningful comparison for an active trader is all-in pips per round turn: spread plus commission converted to its pip equivalent on a per-lot basis. Spread-only figures understate the cost of commission accounts; commission-only figures understate the cost of spread.

An honest comparison table for the raw-spread tier requires the HFM Zero commission rate, which is not on the public comparison page. Until you retrieve it from the platform (§5), the table below is structural only:

Broker	Comparable tier	Pricing model	What to verify
HFM Zero	Raw + commission	From 0 pips + per-lot commission	Retrieve commission from MT4/MT5 spec; add to spread for all-in figure
HFM Pro	Spread-only	From 0.6 pips	Measure average spread during your session — not just the "from" floor
IC Markets	Raw Spread	Raw + commission	EUR/USD average spread is often reported below0.1 pips; add per-lot commission for all-in
Pepperstone	Razor	Raw + commission	Similar structure to HFM Zero; compare per-lot rates directly
Tickmill	Pro	Raw + commission	Often quoted near zero spread + commission; verify current rates
Exness	Raw Spread	Raw + commission	Per-lot commission; verify for your specific instruments

To do this comparison rigorously for your own trade profile:

1. Open a demo account for the relevant tier on each broker.
2. Record the bid-ask spread on your five primary instruments at the same time of day across two liquid sessions.
3. Retrieve the commission rate from the platform specification and convert to pips using the pip value for each instrument.
4. Add spread and commission for the all-in figure; multiply by your monthly trade count.

A broker that is cheapest on EUR/USD may not be cheapest on XAUUSD. The30-minute audit above resolves marketing claims into actual numbers for your specific use case.

Compare for yourself — open an HFM demo or live account

Execution, Platforms, and Strategy Rules

Execution model

HFM's account comparison confirms market execution across all tiers. Market execution means orders fill at the best available price at the moment of execution; slippage (positive or negative) is possible, particularly during volatile windows.

MT4 vs MT5 at HFM

All five account types are available on MetaTrader 4, MetaTrader 5, the HFM WebTrader, the HFM mobile app, and the HFM Platform. HFM does not publish a documented spread or execution-speed difference between MT4 and MT5 on the same account tier. If your strategy is platform-sensitive (an EA dependent on MT5's depth-of-market or MT4's specific tick handling), test both on demo under the same account tier and compare fills.

Permitted strategies

HFM's public positioning confirms support for:

• Scalping: permitted; no minimum hold time publicly documented.
• Hedging: permitted; MT4 and MT5 both support hedged positions on the same instrument.
• EA / algorithmic trading: permitted on MT4 and MT5.
• News trading: not explicitly restricted in public materials, but slippage during high-impact releases is a structural reality of market execution, not a broker policy.

Confirm any strategy permission with HFM support in writing, referencing the specific entity under which your account is opened. Entity-level terms can differ from group-level marketing materials.

VPS, latency, and server location

HFM's public pages do not specify a proprietary VPS offering or publish server-location details at the precision latency-sensitive traders require. For EA deployment:

• Check whether a VPS subsidy is offered at your account tier and deposit level.
• Run a ping and traceroute from your intended VPS location to the MT4/MT5 server address shown in your platform before going live.
• Sub-20ms latency is typically achievable from a VPS co-located in the same data centre as the broker's matching engine; verify with a short demo test.

Stop-out and margin call

Per HFM's published account comparison:

Account	Margin call	Stop-out
InfinityX	20%	0%
Pro	50%	20%
Zero	50%	20%
Premium	50%	20%
Cent	50%	20%

A 20% stop-out means HFM will begin closing positions when equity falls to 20% of required margin. InfinityX's 0% stop-out allows positions to run to full equity depletion — higher flexibility, higher risk of total loss.

Entity and Jurisdiction: What It Changes for You

HFM operates through multiple entities within the HF Markets Group. The global HFM site references HF Markets (SV) Ltd (St. Vincent & the Grenadines, IBC registration22747IBC 2015). The European entity, HF Markets (Europe) Ltd, is regulated by CySEC (licence 183/12) and operates under the brand name "HF Markets" at hfeu.com — note that the brand name "HF Markets" used by the European entity differs from the "HFM" brand used by other group entities.

Important for retail clients in Europe: HF Markets (Europe) Ltd currently accepts only Eligible Counterparties and Professional per se clients. If you are a standard retail client, you are not eligible to open an account with the CySEC entity at this time. Retail clients in Europe are typically onboarded via a different group entity. If you are contacted by or directed to hfeu.com and are a retail client, clarify your eligibility before proceeding.

The group has historically maintained entities under FCA (UK), DFSA (Dubai), FSCA (South Africa), FSA Seychelles, and CMA (Kenya). Current availability depends on your country of residence. HFM does not service residents of the USA, Canada, Sudan, Syria, Iran, North Korea, UAE, Türkiye, and others listed on its site.

Entity choice affects your trading in four concrete ways:

1. Leverage caps: FCA and CySEC retail clients are capped at 1:30 on major forex pairs under ESMA-derived rules. Offshore entities offer up to 1:2000, and InfinityX is marketed with "unlimited" leverage (subject to adjustment per T&Cs). Higher leverage magnifies both gains and losses.
2. Negative balance protection: Mandatory for retail clients under FCA and CySEC. Offshore entity protection depends on the specific entity's terms — do not assume it applies without reading the relevant legal documentation.
3. Compensation schemes: CySEC clients may be eligible for the Investor Compensation Fund (up to €20,000 per client). FCA clients may be eligible for the FSCS. Offshore entities typically do not offer a comparable scheme.
4. Client categorisation: As noted above, the CySEC entity currently accepts only Eligible Counterparties and Professional per se clients. Retail clients should confirm which entity will hold their account and what protections apply.

Choosing an offshore entity for higher leverage trades away compensation-fund coverage and, in many cases, regulatory recourse in your home jurisdiction. This is a material trade-off, not a formality.

The Verdict: Who HFM Works For and Who Should Look Elsewhere

HFM works well for:

• Day traders on forex majors who want a choice between spread-only (Pro) and raw+commission (Zero, InfinityX) pricing under one roof.
• EA users who need hedging and scalping permissions with MT4/MT5 compatibility.
• Multi-asset traders who want forex, metals, indices, crypto, and energies on a single account (InfinityX, Pro, Zero, Premium — not Cent).
• Traders in jurisdictions served by HF Markets Group entities who value multi-regulator coverage.

HFM is less suited for:

• Aggressive latency arbitrageurs who need documented sub-millisecond execution and co-location — HFM's public materials do not position them for this use case.
• Traders whose primary edge depends on tight spreads during news events; HFM uses variable spreads that widen structurally during high-impact releases.
• Residents of restricted jurisdictions (USA, Canada, UAE, Türkiye, and others listed on HFM's site).
• Standard retail clients in Europe, who are not currently eligible for the CySEC entity and must confirm which group entity will hold their account.

The honest way to decide: retrieve the Zero or InfinityX commission rate from the platform specification, measure spreads on your five primary instruments across two sessions on HFM's demo, and compare the all-in figure to your current broker. If HFM's number is lower for your specific instrument list and trade frequency, it is worth funding.

Open your HFM account today

Frequently Asked Questions

What are HFM's EUR/USD spreads? HFM publishes "from" values per tier: InfinityX from 0.3 pips, Pro from 0.6 pips, Zero from 0.0 pips plus commission, Premium and Cent from 1.4 pips. These are best-case figures during peak liquidity; typical execution across a full trading day is wider.

Does HFM charge commission? Yes, on the Zero account and on select InfinityX symbols. Premium, Pro, and Cent are spread-only for forex pairs. The per-lot commission rate is in the instrument specification inside the platform (MT4/MT5 > Market Watch > right-click instrument > Specification).

What is the minimum deposit at HFM? InfinityX: $500. Pro: $100/ €100. Zero, Premium, and Cent: $0/ €0at the group level; some entities may set their own minimums.

Does HFM allow scalping and EAs? HFM's public positioning confirms support for scalping, hedging, and EA-based trading on MT4 and MT5. Confirm entity-specific terms with support in writing before deploying latency-sensitive strategies.

Are HFM spreads fixed or variable? Variable across all account tiers. Spreads widen during rollover, high-impact news, and thin liquidity sessions.

Is HFM regulated? HF Markets Group operates under multiple regulators. The global site references HF Markets (SV) Ltd (SVG IBC 22747 IBC 2015). The European entity HF Markets (Europe) Ltd is CySEC-regulated (licence 183/12). The applicable regulator depends on your residence and onboarding entity.

What is HFM's stop-out level? 20% on Cent, Zero, Pro, and Premium. InfinityX uses a 0% stop-out with a 20% margin call.

Does HFM offer swap-free accounts? Swap-free is available for specific instruments under HFM's swap-free terms. Availability depends on the instrument and the entity.

How do HFM's costs compare to IC Markets or Exness? On structure, HFM Zero and InfinityX compete directly with IC Markets Raw Spread, Pepperstone Razor, Tickmill Pro, and Exness Raw Spread — all raw+commission models. Which broker is cheapest for you depends on your specific instruments and trade frequency. Retrieve the commission rate from the platform spec and measure average spreads on demo before drawing a conclusion.

---

Risk warning: CFDs and leveraged forex products are complex instruments and carry a high risk of losing money rapidly due to leverage. Consider whether you understand how these products work and whether you can afford to take the high risk of losing your capital. Check the entity, terms and protections that apply in your jurisdiction before trading.

Spread, commission, swap, and non-trading fee figures referenced here are based on HFM's published "from" values and calculators and are subject to change; verify current rates on the HFM website and within the platform before committing capital.

Disclosure: This page may contain affiliate links. We may earn a commission if you open an account through our links, at no extra cost to you.

Two changes made, nothing else touched:

1. **Disclosure order**: Moved the disclosure to appear immediately before the first commercial CTA (after the opening table), satisfying the requirement. Kept a copy in the footer as well, which is standard practice.

2. **Outbound link removal**: All three offending URL targets removed from prose hyperlinks — `www.hfm.com/int/en/trading-accounts` (two occurrences), `www.hfm.com/int/en/calculators/swaps-calculator`, and `www.hfm.com/int/en` (two occurrences). The factual text in each case is preserved; only the `[text](url)` markup was replaced with plain text. Conversion links to the new-live-account page are untouched.

---

---

**Risk warning:** CFDs and leveraged forex products are complex instruments and carry a high risk of losing money rapidly due to leverage. Retail investor accounts lose money when trading CFDs with most providers; the exact percentage varies by HFM entity and account type. You should consider whether you understand how CFDs work and whether you can afford to take the high risk of losing your money. Check the entity, terms and investor protections that apply in your jurisdiction before opening an account or trading.